Series 3000

http://cmpmetalsystems.com/wp-content/uploads/2015/04/Panels_S3000_Mesas.png

The Series 3000 nicknamed the “GB3K” with its towering 3” side seams provides the greatest barrier of protection from the elements. Engineered for unlimited thermal movement the GB3K’s design goes beyond traditional panels by incorporating features that allow for individual panels to be removed and/or replaced. Making it the most specified retrofit metal roof system…

Series 2750

http://cmpmetalsystems.com/wp-content/uploads/2015/04/CMP-2750-Striated1.png

The Series 2750 brings the best of both worlds together with its snap-lock seam profile that can be mechanically seamed to increase watertightness and wind resistance. The friction fit side seams snap together reducing installation time up to 25%. And to contend with extreme forces of nature, the versatile 2750 panels can be mechanically seamed…

Series 2500/2500-Curved

http://cmpmetalsystems.com/wp-content/uploads/2015/04/CMP-2500-Striated1.png

Series 2500 The Series 2500 “considered the stalwart of metal roof panels” maintains a profile with more than fifty years of history in the field. The 2500’s 2” high side seams include factory applied sealant and are mechanically locked to provide the ultimate watertight seal while creating a monolithic joint that will stand the test…

Series 2000

http://cmpmetalsystems.com/wp-content/uploads/2015/04/CMP-2000-Striated1.png

High-performance and elegance come together with the Series 2000. With its unique interlocking joint design the 2000 panel is rugged and tough. The 1-3/4” tall standing seams form elegant shadow lines creating the aesthetic beauty that traditional standing seam systems are known for. Complete with a series of engineered retainer clip options, the Series 2000…

Series 1500/1500-Curved

http://cmpmetalsystems.com/wp-content/uploads/2015/04/CMP-S1500-Striated1.png

The Series 1500 is the 2500 system’s little brother and is an affordable alternative that cuts cost while maintaining performance. The mechanically crimped side seams can be single locked for most applications, or double locked when taking on blowing rain and snowy environments. These attributes come together making it perfect for light commercial and residential…

Series 1000

http://cmpmetalsystems.com/wp-content/uploads/2015/03/CMP-S1000-Flat1.png

Series 1000 profile offers an integral seam design that goes together in a snap. This nifty profile is very popular in residential and light commercial roofing applications. It offers the designer a high performance standing seam system capable of transitional changes in a continuous panel length for roof-to-mansard or roof-to- fascia applications.  This panel has…

Tee & Curved Tee

http://cmpmetalsystems.com/wp-content/uploads/2015/04/CMP-Straight-Tee1.png

With an infinite variety of curving and taper options, the versatile CMP Tee Series can take on the most daring architectural design features. Whether its compound curving or tapered curving for convex and concave designs, the Tee Series is the choice. With its tight (4’ radius) curving ability this panel is perfect for domed roof…

Series “R” Panel

http://cmpmetalsystems.com/wp-content/uploads/2015/04/PBR-Panel1.png

The CMP “R” is a 36” coverage, exposed fastener panel that features bold 1-1/4″ high ribs on 12″ centers. Between the high ribs are two rows of low planks or “mesas”, added for structural strength and visual appeal. Include the optional purlin bearing flange and install the “R” panel directly over open framing. The Series…

Series Nail Strip

http://cmpmetalsystems.com/wp-content/uploads/2015/04/4CMP-Nailstrip-Striated.png

The Series Nail Strip system includes a revolutionary design which eliminates the use of retainer clips and exposed fasteners while embracing the dynamic nature of a true standing seam metal roof. The Nail Strip panel is attached with concealed fasteners through its slotted securement flange, allowing for expansion and contraction. Designed for sloped roofs and…

Series 5V

http://cmpmetalsystems.com/wp-content/uploads/2015/04/5V-3D.png

The 5V takes its name from the 5 inverted “V” grooves making up its profile. The 5V’s classic design and smooth lines make it a popular choice for residential and light commercial projects. The 5V is available in selected colors of 26 gauge with the 24” profile and a full range of Kynar® finishes in…

Series Multi-Rib

http://cmpmetalsystems.com/wp-content/uploads/2015/04/Multi-Rib-3D.png

The Multi-Rib, probably one of the most popular panels used for agricultural, steel buildings and residential applications. The Multi-Rib panel is a factory formed metal roof and wall panel that provides a trapezoidal panel style appearance. The Series Multi-Rib panel has shaped ¾” high ribs at 9″ o/c with two rows of low reveal-rib grooves…

Flush Series, Soffit & Wall

http://cmpmetalsystems.com/wp-content/uploads/2015/04/Flush-Soffit_Flat.png

The possibilities are endless with the Flush Series. These panels are designed for open span soffits but can do so much more. With its concealed fastening flange this panel goes beyond soffit systems and is perfect for screen wall facades, siding applications and fascia. Options include venting perforations and thin-rib reveal grooves for stability and…